Angelcare has been the leader in movement baby monitors for 15 years, providing optimal peace of mind for millions of parents around the world.
The AC403 Movement and Sound Baby Monitor is the enhanced version of the UK's bestselling AC401 monitor. Watching over your baby when you can’t.
Angelcare AC403 Movement and Sound Baby Monitor. How to install the Sensor Pad Correctly: Step 1. Place the hardboard in the middle of the cot between the base of the cot and the mattress Step 2. Place the Sensor Pad "print side up" on top of the hardboard in the middle of the cot Step 3. Safely pass the Sensor Pad cord through the slatted base or springs of the cot keeping the Sensor Pad cord well away from baby at all times IMPORTANT NOTE: If your cot has a solid hardwood base; drill a hole in the hardwood base and pass the Sensor Pad cord safely through the hole, keeping the cord well away from baby at all times Step 4. Safely secure the Sensor Pad cord by wrapping it around one of the cot legs and attach it securely using a plastic cable tie Step 5. Plug the Sensor Pad cord into the Nursery Unit, with the Sensor Pad cord running safely and well out of reach of children Step 6. The Nursery Unit and Parent Unit MUST be a minimum of 1m (3ft) away from the cot
The temperature in baby's room is displayed on the Parent Unit, an alarm can be set to sound if temperature is too high or too low.
The Parent Unit can be set to vibrate, sound alert or both when an alarm is activated.
The Angelcare Nursery Unit rim acts as a soothing night light, allowing you to check in on baby with minimal distruption.
Sensitivity of the Sensor Pad can be adjusted as baby grows and becomes more active.
1 x Parent unit
1 x Nursery unit
1 x Sensor pad
2 x AC adaptors
3 x Rechargeable batteries for parent unit
1 x Instruction manual